Eventide 26, marine ply - epoxying the bilges?

Ask an Expert !
Do you have a question about any aspect of YM designed boats?

Moderators: Eventide Owners Group, Piskie, chris s

Post Reply
jemscott1970
Posts: 1
Joined: Sat May 8th, 2021, 5:39 pm

Eventide 26, marine ply - epoxying the bilges?

Post by jemscott1970 »

Hi, all
I've stripped the bilges in my Eventide 26 virtually back to bare wood (that was fun...). I'm now considering whether to apply a coat of epoxy before painting, perhaps just to the keelson. Is this a good thing to do, or am I better off just priming?
Thanks!
Jeremy (Cosmic Wind)
chris s
Posts: 151
Joined: Sun March 5th, 2006, 6:55 pm
Location: Netherlands

Re: Eventide 26, marine ply - epoxying the bilges?

Post by chris s »

I would suggest a coat of epoxy might be beneficial
Post Reply