Plastimo 608T spar

You can talk about almost anything here

Moderators: Eventide Owners Group, Piskie, chris s

andy webster
Posts: 4
Joined: Sat May 29th, 2010, 6:21 pm

Plastimo 608T spar

Postby andy webster » Mon July 26th, 2010, 9:51 am

I'm trying to find a short length of spar for this old Plastimo 608T furling system..... the current spares supplied by Plastimo are a different profile and they no longer stock spars like these - they're over 15 years old. I'm not sure if I could expect them to support 15y/o products, but they said 'just buy a new one'.... sure, with that six hundred quid I don't need!

So can anyone point me at four feet of 15y/o plastimo spare - please? The o/d of the extrusion is 35mm, Photo in next post

Thanks, Andy

andy webster
Posts: 4
Joined: Sat May 29th, 2010, 6:21 pm

Re: Plastimo 608T spar

Postby andy webster » Mon July 26th, 2010, 9:55 am


User avatar
Fiddler's Green
Posts: 180
Joined: Wed March 1st, 2006, 12:58 pm
Location: Essex
Contact:

Re: Plastimo 608T spar

Postby Fiddler's Green » Fri January 20th, 2012, 7:31 pm

Just browsing and seen your post. by now you will have sorted it no doubt.... I have had luck with items like this by contacting riggers and mast suppliers, who often have bits of old gear saved 'just in case'.

This is just for others who may have similar problems..

Regards,
john
Proud owner and builder of 'Fiddler's Green'


Return to “General Board”

Who is online

Users browsing this forum: No registered users and 1 guest