Hi, all
I've stripped the bilges in my Eventide 26 virtually back to bare wood (that was fun...). I'm now considering whether to apply a coat of epoxy before painting, perhaps just to the keelson. Is this a good thing to do, or am I better off just priming?
Thanks!
Jeremy (Cosmic Wind)
Eventide 26, marine ply - epoxying the bilges?
Moderators: Eventide Owners Group, Piskie, chris s
-
- Posts: 1
- Joined: Sat May 8th, 2021, 5:39 pm
Re: Eventide 26, marine ply - epoxying the bilges?
I would suggest a coat of epoxy might be beneficial