Search found 50 matches

by helenrose
Sun December 25th, 2011, 11:00 am
Forum: HELP ?
Topic: Converting E24 Mainsail to Slab Reefing
Replies: 2
Views: 21050

Re: Converting E24 Mainsail to Slab Reefing

I converted my main from roller reefing a while back and John has just about covered it all, i put double reefing lines in but as john has said the amount of string in the cockpit can be a problem when reefed,i have now taken the first reefing line out on the basis that if i am going to reef i might...
by helenrose
Sun March 13th, 2011, 7:04 pm
Forum: HELP ?
Topic: removing my bilge keels for improved windward performance
Replies: 6
Views: 35898

Re: removing my bilge keels for improved windward performanc

I would like to agree with John about adding ballast to the bottom edge of the bilge plates, in my case it was in the form of 80x12mm lengths of flat steel welded on. They added a fair bit of low down weight and as a result my E24 used to suprise quite a few newer boats with her turn of speed. I mis...
by helenrose
Thu February 24th, 2011, 1:50 pm
Forum: HELP ?
Topic: Sabb Head
Replies: 0
Views: 33684

Sabb Head

Hi All,
i want to remove the head from my Sabb 10hp to clear the waterways apart from a new head gasket what other parts will i need to renew?

Thanks in advance
Chris.
by helenrose
Sun July 25th, 2010, 8:59 pm
Forum: HELP ?
Topic: Sabb diesel
Replies: 10
Views: 35661

Re: Sabb diesel

Hi Jason,
sorry to hear the Sabb has broken down,would it be cost effective to repair it?
Sleeman hawkins will advise you on this and have all the spare parts.
best of luck,

Chris.
by helenrose
Mon June 14th, 2010, 1:57 pm
Forum: HELP ?
Topic: Sabb diesel
Replies: 10
Views: 35661

Re: Sabb diesel

Hi jason thanks for the reply,

i have been trying to PM you but its not working for some reason,
i think i will try the 15/40 oil and change it a bit more often,
as to the pressure gauge,the engine is splash lubricated so no oil pressure.
regards

chris.
by helenrose
Thu June 10th, 2010, 9:32 pm
Forum: HELP ?
Topic: Sabb diesel
Replies: 10
Views: 35661

Re: Sabb diesel

Thanks for the reply Jason, I have been told i am worrying about nothing, as usual. the water flow is fine and the temp gauge hardly flickers even after a longish run, have you a oil pressure gauge fitted to your engine? I would like to fit one to mine but i wouldnt know where to start! regards Chris.
by helenrose
Thu June 10th, 2010, 9:25 pm
Forum: HELP ?
Topic: Sabb lube oil
Replies: 2
Views: 13349

Sabb lube oil

Hi,

can i use 15/40 multigrade oil in my Sabb 10hp engine?

thanks in advance,

Chris.
by helenrose
Mon December 14th, 2009, 5:25 pm
Forum: HELP ?
Topic: Engine beds
Replies: 1
Views: 9754

Engine beds

Hi what would be the best wood to use for engine beds in a plastic boat?

the engine is a Sabb 10hp with solid mounts,

i have been offered some oak but i am not sure of its suitability.

thanks.
by helenrose
Fri December 4th, 2009, 2:51 pm
Forum: HELP ?
Topic: Sabb diesel
Replies: 10
Views: 35661

Sabb diesel

Hi, i have a sabb 10hp diesel in my new to me boat,the engine runs fine and is very reliable,one thing that worrys me though is the cylinder head near to where the cigarette plug is and right under the injector gets quite hot,the rest of the head and engine is nice and cool,is this ok?or do i need t...
by helenrose
Thu December 3rd, 2009, 3:59 pm
Forum: HELP ?
Topic: Athaena - Foredeck repairs
Replies: 41
Views: 258201

Re: Athaena - Foredeck repairs

Hi Chris,

the plate for the inner forestay on my bowsprit is just bolted through the bowsprit,so no need to remove it,should be the same on yours hopefully,

its quite a straightfoward job.

best of luck.

Chris.
by helenrose
Thu December 3rd, 2009, 7:52 am
Forum: HELP ?
Topic: Athaena - Foredeck repairs
Replies: 41
Views: 258201

Re: Athaena - Foredeck repairs

Hi Chris, My Eventide 24 had a bit of rot on the fore deck which meant i had to take my bowsprit off,yours looks like mine, this is how i did it,its easier if theres two of you. first you need to remove the fore stay,it helps if all your rigging is slack i found esp the back stay(s) then the bob sta...
by helenrose
Thu November 19th, 2009, 7:37 pm
Forum: Latest News
Topic: It's a pity that the site is not very current
Replies: 13
Views: 54848

Re: It's a pity that the site is not very current

Hi John, I know what you mean,i had an Eventide 24 for five years,she was my first wooden boat and i fell in love with her, she didnt need much looking after as her hull was epoxyed and her topsides cascovered, all she needed at the start of the season was a wash down and she would look fine,her cab...
by helenrose
Tue November 10th, 2009, 6:00 pm
Forum: General Board
Topic: Still looking for an Eventide...
Replies: 5
Views: 19032

Re: Still looking for an Eventide...

Hi Simon,I dont want to raise your hopes too much but there is an Eventide 27 for sale in bits in Cardiff yacht Club,she needs a lot of work,in fact a complete refit i think the owner has run out of time,i think you could get her for a song. if you visit CYC website she is in the for sale section, g...
by helenrose
Mon November 9th, 2009, 5:43 pm
Forum: HELP ?
Topic: Athaena - Rot near the chine
Replies: 19
Views: 55332

Re: Athaena - Rot near the chine

That looks first class,a weight off your mind i bet.

chris
by helenrose
Thu September 3rd, 2009, 9:21 pm
Forum: General Board
Topic: Eventide wanted in New Year
Replies: 1
Views: 10124

Re: Eventide wanted in New Year

Hi Simon,
I am thinking of selling my Eventide 24, shes in good condition and needs no work as far as i know,shes afloat in s wales,come for a trial sail,
Chris.